Introduction
Mono Class-AB Amplifier
Features
Max. Power Output of 500WRMS Power Output: 150W x 1 at 4 ohms, 250W x 1 at 2 ohmsClass-AB CircuitMOS-FET Power SupplyFrequency Response: 20 - 200Hz (-3dB)S/N: 80dBA at 2VrmsTHD: < 0.08%LPF (50 - 200Hz, 18dB)Subsonic Filter (20Hz Fix)High Level Input :L/RHigh Level Input :YesBass Boost Control :Switchable (OFF / LOW / HIGH)Anti-Pop Circuit
Specifications
Amplifier
Maximum Power Output 500W
RMS Power Output (4 ohm) [ 1% THD 14.4V ] 150W x 1 (20 - 200Hz)
RMS Power Output (2 ohm) [ 1% THD 14.4V ] 250W x 1 (20 - 200Hz)
Class Class-AB
Frequency Response (+0, -3dB) 20 - 200Hz
Total Hamonic Distortion < 0.08%
Signal-to-Noise Ratio
(reference: 1W into 4 ohms), CEA-2006 Compliant > 80dB
Load Impedance Allowance 2 - 8 ohms
LPF 50 - 200Hz (18dB)
Subsonic Filter 20Hz Fix
RCA Input L / R
High Level Input Yes
Input Sensitivity 0.2 - 5V
Bass Boost Control at 45Hz Switchable (OFF / LOW / HIGH)
Protection Circuitry
(Thermal / Short Circuit / Overload / DC Offset) Yes
Anti-Pop Circuit Yes
Dimensions (W x H x D) 226 x 49.5 x 185mm (8-15/16" x 2" x 7-5/16")
Weight 1.4kg (3.1lbs)